Electrical wiring in a private house. Top articles

Nowadays, no private home can do without electricity. Correct installation of electrical wiring in a private house is a complex process that involves several mandatory steps.

This is developing an idea, determining the approaches and technical solutions that will be used, creating a project, connecting a private house to the power grid, choosing the necessary electrical products and materials, wires and cables, protection devices, installing the ground loop, completing and installing the input electrical panel, laying the wiring, correct contact connections, installation of sockets and switches, connection of various household electrical appliances. Installation of electrical wiring in a private house requires careful implementation of all stages.

This section contains the best articles on the site. bgv.electricianexp.comhaving read that you can technically competently electrify a private house. Only specific practical information is collected in the articles, without “water”. It is important to remember that the installation of electrical wiring in a private house can only be performed by professional electricians in strict accordance with the project.

If you are not such a specialist, the information provided in the articles will also be very useful, as it will allow you to fully understand how the electrification process at home should go, what equipment and materials are needed for this, what you need to pay attention to, what results to expect , i.e. You will be able to conduct personal supervision and control over the work of hired specialists with competence.

So, the selected articles on bgv.electricianexp.com on the topic "Wiring in a private house":

What is better for a private house - single-phase or three-phase input?

What are the advantages and disadvantages of three-phase input into a private house? Why the transfer of a private house to a three-phase network can cause an extra headache? In what cases is it advisable to carry out three-phase input, and in which it can be limited to single-phase?

How to make entry into the house using SIP

The article details the air input device to a private house with the help of a modern and increasingly popular self-supporting insulated wire. Why SIP, how to mount, how to get inside? The answers to these questions, as well as the main points that you should pay attention to when installing the air inlet into a private house using SIP, are described in this article.

Power supply of a modern kitchen

The choice of wiring and electrical equipment for a modern kitchen, based on practical experience. Which wiring in the kitchen is preferable? Calculation of the total power of electrical appliances. Calculation of electrical wiring for the kitchen. Why does the kitchen need an electrical panel? Sockets and switches for the kitchen and much more.

Power supply and bathroom lighting

The article describes the rules for safe installation and wiring in the bathroom. Which cable to use, how to properly lay it, where to place junction boxes, switches and sockets? Which lamps are best used for lighting a bathroom? Why is it necessary to install an RCD and create a potential equalization system? How to do it right?

Wiring in the attics and basements

This article discusses how to properly install wiring in the basement and in the attic private homewhat are the requirements for wiring in such premises and how to fulfill these requirements.

Lighting control in the house

Lighting control circuits, circuit breakers.Examples of the use of pulse relays, motion sensors, twilight switches, power controllers for the smooth switching on of lamps, dimmers, electronic timers. Automation of lighting control usingm X10 technology.

Why can not the aluminum cable be used in electrical wiring?

Why is aluminum gradually removed from everyday life when installing electrical installations? Why is he bad and dangerous? To answer these questions, you need to recall something from physics and a bit from the school chemistry course ...

Which wires and cables are best used in home wiring

The article describes the wires and cables that can be used in wiring in a private house (VVG, NYM, PUNP, PV and others), their preferred areas of application are given, the requirements of the PUE for painting the insulation of wires and cables are described.

Concealed wiring

Classification of hidden electrical wiring by cable laying method. Requirements for flush wiring and how these requirements are met. Necessary materials and equipment, features and main stages of installation of hidden electrical wiring.

How to make a shtroba and fasten a cable in it

In the vast majority of cases, when installing a hidden electrical wiring, one can not do without such a dirty and noisy procedure as gating. This article tells about how to make a strobe correctly, what tools are needed for this, how to properly lay and secure a cable in a strobe.

Open wiring - popular wiring methods

Advantages and disadvantages of open wiring, suitable areas of application. Laying methods, combination optionsI different ways. Materials used in installation open wiringand.

Installation of open wiring in the home

Various ways of installing open electrical wiring are considered: cable laying with brackets, retro-style on rollers made of RSh-4 porcelain, plastic ducts, corrugated metal hose with plastic corrugation, European skirting boards.

Plastic ducts (cable channels)

Installation of wiring in plastic boxes is a difficult and time-consuming task. But with a competent and accurate approach, the result can exceed all expectations, both in terms of aesthetics and on the technical side. The article provides selection tips, describes the technology of their installation, the necessary tools and materials.

Retro wiring in a wooden house

What is retro wiring? How to use simple means to simulate retro wiring? Where can I buy a special factory-made retro wire and special fittings, sockets and switches? How to properly perform retro wiring in wooden houses? How to connect the wires of retro wires?

The choice of cable cross-section for an apartment, house, cottage

What should be considered when choosing the cross-section of the input cable, as well as the cross-section of wires and cables for socket groups and lighting? The article provides a table of the dependence of the cable cross section on the power and current of consumers and gives recommendations for working with it.

How to connect wires correctly

Almost all problems associated with electricity arise due to poorly made contacts. What is the best way to connect the wires so thats was there reliable contact and so as not to have problems in the future? The article describes the most common methods of connecting wires, their advantages and disadvantages, and areas of use.

Wago terminal blocks in home wiring

Perhaps, at present, the most heated debate and debate among electricians raises the question of using terminal blocks with flat spring clips for connecting wires. It seems that if all the electricians were well acquainted with the WAGO terminal blocks, these disputes would be less. What are the advantages of these terminal blocks, and how are they good?

Wiring Methods

Very often you have to connect the electrical installation to an existing line, passing by in relative proximity. In other words, it is necessary to create a branch of the wires. There are many options and solutions to this problem. This article discusses the most common methods of branching wires, describes the advantages and disadvantages of each method.

Junction Boxes for Home Wiring

What are branch boxes for? Types of junction boxes. Branch boxes for external and hidden wiring, technology for their installation.

How to choose the right meter

We deal with the types and capabilities of electric meters and choose which one can and should be bought.

Automata, difavtomats and ouzo, problems of choice

Classification and practical experience in the application of electrical wiring protection systems. Classification of machines, RCD. How to choose the electrical protection devices.

How to choose a voltage stabilizer for a country house

The article describes how to choose the right stabilizer, at what power it is necessary to choose a stabilizer, so that it works reliably, and not overpay for extra kilowatts, the amount of which directly affects the cost of the device.

Armature for mounting sockets and switches

Neither sockets nor switches are hanging in the air - they need to be somehow fixed to the wall. The article describes how to install sockets and switches, depending on the type of wiring.

How to lay the cable and connect the fixtures in the garden

The article tells how to correctly and competently bring electricity to the lamps in the courtyard and on the plot of a private house, what cable you need to use, how to properly install it and what you need to know.

How to make wiring in a bath

The practice of laying electrical wiring for wooden buildings with wet rooms. The article describes two ways of wiring a cable in a bathhouse. How to install sockets and switches, lay wiring.

How to make wiring in the garage

Input device and wiring in the garage of a private house, features of the wiring in the garage. The article also provides recommendations on how to properly electrify the inspection pit.